Products
SGA9000X-16P Piston Water Hammer Absorber
The SGA9000X piston-type water hammer absorber is a device used to eliminate water hammer shock waves caused by various reasons in pipelines, protecting pipes and equipment from damage. It utilizes the expansion and contraction of air in the upper chamber of the piston to buffer sudden shock waves, thereby alleviating their intensity and minimizing equipment damage caused by massive water hammer forces. This device has a simple structure, high-quality materials, and a long service life.
A swirl preventer is a special pipe fitting used to prevent swirling in a tank (pool) when transporting liquids and to prevent air from entering the pipeline. Its function is to be installed at the inlet of the water pump suction pipe of the tank (pool) to eliminate swirling within the tank (pool), ensuring that the water pump can start at full power and operate normally, avoiding cavitation caused by air entering the pump, and allowing the liquid level in the tank (pool) to drop to a lower level to ensure maximum flow delivery.
SP45F Digital Locking Balancing Valve
This valve is a type of balancing valve, suitable for various liquid pipeline systems, and is a relatively ideal new energy-saving valve. The valve is equipped with a digital display with scales, allowing for intuitive adjustment to any position, and can be locked. This valve is mainly used in heating pipeline systems for industrial and civil buildings. Currently, there are issues of hydraulic imbalance in some pipeline systems, and the balancing valve provides a means to solve this problem, allowing for accurate adjustment of pressure drop and flow rate to improve the flow conditions of liquids in the pipeline system, achieving liquid balance and energy savings. In the renovation of dual-pipe network projects, the application of this valve can still save energy and achieve good results.
The measurement principle of electromagnetic flowmeters is based on Faraday's law of electromagnetic induction. The main components of the sensor include: measuring tube, electrodes, excitation coil, iron core, and magnetic shell. Electromagnetic flowmeters are primarily used to measure the volumetric flow of conductive liquids and slurries in closed pipelines, including highly corrosive liquids such as acids, bases, and salts. Electromagnetic flowmeters are widely used in petrochemical, steel metallurgy, water supply and drainage, hydraulic irrigation, water treatment, environmental sewage total control, papermaking, pharmaceuticals, food, and other industrial and agricultural applications.
Y43X proportional pressure reducing valve
The Y43X proportional pressure reducing valve utilizes the pressure difference generated by the different cross-sectional areas at both ends of the internal piston to change the pressure after the valve, achieving the purpose of pressure reduction. It has accurate proportions, stable operation, long service life, and can withstand high temperatures. It can reduce both dynamic and static pressure and can be installed horizontally or vertically.
SD44X Angle Type Quick Opening Sludge Valve
Installed on the outer bottom wall of various sedimentation tanks to remove sludge and waste from the bottom of the tank. This product is composed of a hydraulic cylinder and an angle shut-off valve, where the power inside the hydraulic cylinder drives the valve to rise and fall, opening or closing the valve body passage to achieve fluid flow control.
SGH300X-16P stainless steel slow-closing check valve
The slow-opening and slow-closing multifunctional check valve produced by our company is designed and manufactured based on advanced imported products and domestic types. Its main purpose is to prevent backflow of the medium in the pump outlet pipeline of high-rise building water supply systems and other water supply systems.
ZSFM Rain Soaked Alarm Valve - Diaphragm Type
When a fire occurs in the protected area, the temperature and smoke detectors detect the fire signal. Through the fire alarm and extinguishing control system, the solenoid valve of the deluge valve is directly opened, allowing the water in the pressure chamber to be quickly discharged. As the pressure chamber depressurizes, the water below the valve is rapidly pushed up, allowing the water to flow into the working chamber and into the entire piping network for fire extinguishing. (If the duty personnel detect a fire, they can also manually open the manual quick-opening valve to activate the deluge valve.) At the same time, part of the pressurized water flows to the alarm piping network, causing the hydraulic bell to ring and the pressure switch to activate, sending a signal to the duty room or directly activating the fire pump for water supply.
The straight stream nozzle produced by our company emits a columnar water flow, with a long range, high flow rate, and strong impact, used for extinguishing general solid material fires and for auxiliary cooling during firefighting. It can generally be divided into ordinary straight stream nozzles and switch straight stream nozzles.
Smart anti-collision and anti-theft ground fire hydrant
Monitoring parameters: 1. Water for valve opening 2. Water pressure monitoring 3. Battery voltage 4. Tilt monitoring Alarm methods: platform alarm, mobile APP alarm, SMS alarm
H84X groove rubber flap check valve
The rubber flap check valve consists of a valve body, valve cover, and valve flap, and is mainly used in the pipeline outlet of drainage systems, petroleum, chemical, and other industrial sectors to prevent backflow of media. Due to the inclined design of the sealing ring, the closing time is short, which can reduce water hammer pressure.
YLKG-16P Stainless Steel Pressure Switch
The fire pressure switch is a pressure control device that can issue an alarm or control signal when the measured pressure reaches the rated value. Fire pressure switches are generally used to start the sprinkler pump, monitor the working status of the alarm valve, and detect changes in the pressure within the pipeline.
Z85T groove type concealed rod hard seal gate valve
The hard-sealed groove gate valve is composed of parts such as the valve body, valve cover, valve rod, nut, and valve plate. This valve 'gate' utilizes the compensatory effect of slight deformation of the gate plate to achieve a good sealing effect. The valve has significant advantages such as light switching, reliable sealing, and long service life, and is widely used in fluid pipelines in water supply, sewage, construction, petroleum, chemical, food, pharmaceuticals, electricity, shipping, metallurgy, water services, energy, etc., serving as a regulating and shut-off device.
Z81X Groove Type Soft Sealing Gate Valve
Grooved (clamp) connection valves are characterized by quick, easy, safe, and reliable installation, unrestricted by installation site, facilitating maintenance of pipelines and valves. They provide vibration and sound insulation, and can overcome deviations caused by misalignment of pipeline connections within a certain angular range, addressing issues such as thermal expansion and contraction due to temperature differences. They are widely used in fluid transport pipelines for water supply and drainage, fire protection, air conditioning, gas, petroleum, chemical, water treatment, municipal, and shipbuilding projects as a means of controlling fluid flow.
Address: 261 High-tech Park South Road, Lun Cang Town, Nanan City, Quanzhou City, Fujian Province
Telephone:0595-29880666
Fax:0595-86181291
Website:www.fjspfm.com
E-mail: fjspfm@163.com
COPYRIGHT©2022 Fujian Shenpai Valve Manufacturing Co., Ltd ALL RIGHTS RESERVED.